MATERIAL HANDLING · PLASTICS AUXILIARIESStart with your material and production needs
JIANXUN MACHINERY

Plastics Recycling & Pelletizing Knowledge Center

Explore materials, processes and equipment selection to prepare a clearer purchasing brief.

Process

How a Plastics Recycling and Pelletizing Line Works

Assess clean production scrap separately from collected waste. Describe the source, contamination and intended use before deciding whether washing belongs in the project.

Read guide →
Materials

Preparing a PE or PP Film Recycling Brief

Identify PE, PP and other constituents rather than listing only “waste plastic”. Share the source, printing, laminate layers and contamination. Do not assume mixed inputs will produce a single consistent pellet grade.

Read guide →
Selection

Single-stage vs Two-stage Pelletizing

Stage count describes the extrusion arrangement, not a quality grade. A supplier may distribute plasticizing, degassing and conveying duties across stages; check the actual design.

Read guide →
Process

Strand vs Water-ring Pelletizing

Conventional strand systems cool extruded strands before cutting. Water-ring systems typically cut at the die face, then carry and cool pellets with water. Water-ring and underwater systems are distinct arrangements.

Read guide →
Materials

Dewatering and Drying Washed Plastics

Treat dewatering and drying as separate duties. Describe the incoming condition, preparation route and downstream feed requirements instead of requesting simply “as dry as possible”.

Read guide →
Selection

Understanding Pelletizing Line Throughput

Input mass, finished pellets and accepted saleable pellets are different measures. Specify the measurement basis and test period in quotations and trial reports.

Read guide →
Selection

A Purchasing Brief for a Pelletizing Line

Prepare photos or video, source, constituents, physical form and completed preparation steps. State intended pellet use, target rate and a proposed acceptance method.

Read guide →
Maintenance

A Pelletizing Line Maintenance Planning Checklist

This is a maintenance planning aid, not an operating or repair procedure. Trained staff should use the machine manuals to define tasks, intervals and records.

Read guide →
Equipment enlarged view